STREAM CCR 15
This wing is especilly designed for diving with CCR Rebreathers. Buoyancy is 150N.
353 €
CUB 15 set
Set composed of the wing CUB 15 and the stainless-steel backplate 3 mm. Just fasten a single tank and add a regulator and a diver.
526 €
CUB 18 set
Set composed of the wing CUB 18 and the stainless-steel backplate 3 mm. Just fasten a single tank and add a regulator and a diver.
535 €
STREAM 20 set
Set composed of the wing STREAM 20 and the stainless-steel backplate 3 mm. Just fasten double tanks and add a regulators and a diver....
503 €
STREAM 25 set
Set composed of the wing STREAM 20 or 25 and the stainless-steel backplate 3 mm. Just fasten double tanks and add a regulators and a ...
514 €
RING 14
New circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. 2...
344 €
RING 17
New circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18...
348 €
RING 20
New circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 15 - 20...
352 €
CUB 15
Two layer wing for diving with a single tank. Use for a single tank from 10-15L In contrast to our competitors products our wing has ...
352 €
CUB 18
Two layer wing for diving with a single tank. Use for a single tank from 15-20L In contrast to our competitors products our wing has ...
360 €
STREAM RING 23
New circular style wing for diving with doubles. STREAM RING 23 was designed for diving with double tanks from 2x12-2x18 and several ...
342 €
STREAM 15
Small wing for diving with double tanks. It was designed for diving with small double tanks 2x6, 2x7 or for extreme cave dives where ...
317 €
STREAM 20
Two layer wing for double tanks. STREAM 20 was designed for diving with double tanks up to 2*12 l and two AL stages. The wing is very...
329 €
STREAM 25
Two layer wing for double tanks. STREAM 25 was designed for diving with double tanks up to 2*18 l and several AL stages. The wing is ...
340 €
stainless-steel backplate 3 mm set
Stainless-steel backplate, thickness 3 mm with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap...
175 €
stainless-steel backplate 6 mm set
Stainless-steel backplate, thickness 6 mm with PA
299 €
AL backplate 3 mm set
Dural backplate, thickness 3 mm with PA harness, stainless-steel D-rings and stoppers, stainless-steel buckle, crotch strap, buoy poc...
175 €
STREAM RING 20
New circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. D...
329 €
STREAM RING 20 CCR
This wing is especilly designed for diving with CCR Rebreathers. Buoyancy is 200N.
353 €
stainless-steel backplate 3 mm adjustable
Stainless-steel backplate, thickness 3 mm with PA harness, two adjustable stainless-steel buckles, stainless-steel D-rings and stoppe...
203 €
STREAM CCR 20
This wing is especilly designed for diving with CCR Rebreathers. Buoyancy is 200N.
353 €
Al backplate 3 mm adjustable
Dural backplate, thickness 3 mm with PA harness, two adjustable stainless-steel buckles, stainless-steel D-rings and stoppers, stainl...
203 €
stainless-steel backplate 6 mm adjustable
Stainless-steel backplate, thickness 3 mm with PA harness, two adjustable stainless-steel buckles, stainless-steel D-rings and stoppe...
337 €
sidemount SANDWICH complete
Our sidemount was developed for diving in cold waters where there is a need for sufficient ballast for comensating your dry suit and ...
601 €
sidemount SANDWICH wing
The wing from SANDWICH set. It comes out from RING 14, used with sidemount it has 100 N buoyancy.
Part of delivery are also 2 pieces...
312 €
SANDWICH conversion kit
Set for conversion of your standard backplate into sidemount SANDWICH.
It includes 4 d-rings low profile, 4 stoppers, 2 loops made o...
28 €
stainless-steel backplate 3mm
Stainless-steel backplate made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect f...
107 €
Stainless-steel backplate 6 mm
stainless-steel backplate made of salt water resistant stainless-steel. Edges bevelled on a NC cutter, manually polised for perfect f...
223 €
AL backplate
Dural backplate made of aluminium alloy resistant to salt water. Backplate is hard anodized. Edges bevelled on a NC cutter. Thanks to...
107 €
buoy pocket
Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket ...
32 €
crotch strap
Polypropylene strap with stitched on D-ring + 1 D-ring and 1 stopper.
13 €
pocket with knife
Pocket from polyamide strap, stainless-steel knife with jagged blade.
12 €
bottle strap with stainless-steel buckle
Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip ...
30 €
backplate ballast system
Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate. Left pocket has a D-ring for mo...
88 €
tank ballast system
Pockets can be easily mounted to tank straps, they include inner throw-away pockets for 2x 3 kg weights.
83 €
single tank adapter
Adapter for mounting a single tank to a double tanks wing
51 €
strap for backplate
Special-made, hard, very resistant strap for backplate with a whole for a screw.
17 €
stainless-steel belt buckle
High-quality stainless-steel buckle.
6,4 €
stainless-steel D-ring
Stainless-steel D-ring for strap. Thickness 5 mm, width 50 mm.
2,7 €
stainless-steel stopper
Stainless-steel stopper for 50 mm strap.
1,6 €
stainless-steel D-ring bend
Bend stainless-steel D-ring for strap. Thickness 5 mm, width 50 mm.
3 €
harness for backplate complete
The package includes:
- 4m strap with hole
- knife with sheet
- stainless-steel buckle
- rubber band (4x narrow, 1x wide)
- crot...
53 €
belt stop serrated SS
Serrated stainless-steel stopper for 50 mm strap.
1,7 €
D-ring 25 mm SS
Stainless-steel D-ring for strap. Thickness 2 mm, width 25 mm.
1,1 €
stainless-steel stopper large
Stainless-steel stopper for 50 mm strap with bigger holes.
2,2 €
SS buckle for adjustable harness
9 €
harness for backplate, adjustable
The package includes: - 4m strap with hole - knife with sheet - stainless-steel buckle - 2x S-S buckle adjustable - rubber band (4x ...
76 €
stainless steel d-ring, low profile
Low profile stainless-steel D-ring for strap. Thickness 4 mm, width 50 mm.
2,5 €
d-ring welded on triglide
Stainless-steel D-ring welded on triglide. Thickness 5 mm, width 50 mm, high 35mm, triglide 30 x 67mm. th. 2mm.
6,1 €
reel 200 m, with line and double-ender
Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment...
139 €
argon bottle straps 14 cft
For tightening the bigger (1,5 - 2l) argon bottle to the double tanks. Comes in pair (2 pieces).
42 €
1l argon bottle straps (6 cft)
For mounting a small 1 litre argon bottle directly on a backplate. Suitable especially for wreck diving. Comes in pair (2 pieces).
33 €
wetnotes
Indispensable for every diver, waterman or tourist. Waterproof notebook made from plastic foil designed for writing under the water. ...
21 €
calf wraps
Tightening calf wraps reduce inflation of diving suit at calf and foot part while swimming in an appropriate position (with legs slig...
48 €
thigh pocket
A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a spare mask, reel, buoy or a snack. Dimensions 29...
28 €
belt pocket
Pocket for those who do not want to glue pocket on the suit. Dimensions 29x19x6 cm.
28 €
thigh pocket low profile
A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a wetnotes. Dimensions 29x19x4 cm
27 €
decompression, safety spool 17 m
The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 17...
21 €
P-valve unbalanced
Unbalnced P-valve, suitable for all types of diving suits.
56 €
brass pressure gauge, tempered glass, 200 bar
High-quality brass pressure gauge, suitable especially for main tanks. Synoptic dial scale upto 300 bar (working pressure 200 bar). I...
57 €
stainless-steel double end snap short
Stainless-steel double end snap, all-round use for fastening various equipment, overall length 100 mm.
7,8 €
stainless-steel double end snap long
Stainless-steel double end snap, all-round use for fastening various equipment, overall length 120 mm.
8,7 €
stainless-steel bolt-snap big
Stainless-steel snap for decompression bottles, stages and scooters. The eye is 35 mm wide and it is possible to poke through a finge...
11 €
stainless-steel bolt-snap medium
Stainless-steel bolt-snap for pressure gauge, long hose, etc. The eye is 20 mm wide
7,5 €
stainless-steel bolt-snap smal
Stainless-steel bolt-snap for backup torches and small things attaching to a loop in pocket, etc. Length is 75 mm, the eye is 9 mm wi...
6,5 €
rubber knob
Indestructible valve rubber knob with stainless-steel inset.
6,8 €
additional pocket
Additional pocket for backplate ballast system or belt. Dimensions 18 x 15 x 4 cm.
25 €
arrow small
Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.
0,6 €
arrow large
Large arrow for cavedivers, length is 87 mm, width 57 mm.
0,7 €
cookie
Non-directive arrow - cookie, for marking important places, diameter 57 mm.
0,7 €
line 1,8mm PES + kevlar 800m
Line is plaited from PES fibres with Kevlar core. Kevlar core fibres are tough and have no elongation.
104 €
stage rigging kit S80
Complete rigging set for cylinder S80
34 €
stage rigging kit S40
Complete rigging set for cylinder S40
34 €
sidemount back pad
Additional rear part of backplate for attaching the sidemount bottles.
40 €
reel 120 m, with line and double-ender
Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment...
122 €
pressure gauge OXYGEN 300 bar
pressure gauge OXYGEN 300 bar diameter 52 mm, brass body, tempered glass
57 €
P-valve balanced
balnced P-valve, suitable for all types of diving suits.
81 €
reel 60 m, with line and double-ender
Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment...
102 €
decompression, safety spool 24 m
The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 24...
22 €
decompression, safety spool 33 m
The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 33...
25 €
aluminium whistle red
1,5 €
sticker for CCR and argon
small stickers for CCR bottles and argon, dimensions of each sticker 17x5 cm, sold separately (price per piece)
1,3 €
handbag DTD
Size of additional pocket from our portfolio, great for travelling - takes in your passport, air-ticket, little money, phone....
17 €
travell bag DTD
All you need for your dive in one bag, large (87x37 cm) yet lightweight (1,5 kg), great for travel, adjustable straps for carrying on...
81 €
set of stickers OXYGEN 6 and 21
set of stickers for oxygen bottle
7,6 €
MOD sticker
MOD sticker, price per pair
2 €
backup light LED 2 W
98 €
inflator hose 51 cm
inflator hose, length 51 cm
24 €
high pressure hose 60 cm
High pressure hose for gauge, lenght 60 cm.
25 €
high pressure hose 15 cm
High pressure hose for gauge, lenght 15 cm.
20 €
inflator hose 60 cm
inflator hose, length 60 cm
24 €
LP regulator hose 60 cm
LP regulator hose 60 cm for backup regulator
20 €
LP regulator hose 205 cm
LP regulator hose 205 cm for primary regulator
40 €
LP regulator hose 215 cm
LP regulator hose 215 cm for primary regulator
42 €
LP regulator hose 90 cm
LP regulator hose 90 cm for stage
22 €
LP regulator hose 100 cm
LP regulator hose 90 cm for stage
22 €
high pressure hose 70 cm
High pressure hose for gauge, lenght 70 cm.
29 €
high pressure hose 80 cm
High pressure hose for gauge, lenght 80 cm.
29 €
high pressure hose 90 cm
High pressure hose for gauge, lenght 90 cm.
30 €
high pressure hose 100 cm
High pressure hose for gauge, lenght 100 cm.
31 €
high pressure hose 120 cm
High pressure hose for gauge, lenght 120 cm.
33 €
hose MIFLEX Extreme LP 62 cm
27 €
hose MIFLEX Extreme LP 55 cm
27 €
hose MIFLEX Extreme LP 75 cm
30 €
hose MIFLEX Extreme LP 80 cm
30 €
hose MIFLEX Extreme LP 100 cm
31 €
hose MIFLEX Extreme LP 120 cm
35 €
hose MIFLEX Extreme LP 150 cm
41 €
hose MIFLEX Extreme LP 210 cm
45 €
hose MIFLEX Extreme-hi HP 15 cm
31 €
hose MIFLEX Extreme-hi HP 56 cm
33 €
hose MIFLEX Extreme-hi HP 60 cm
34 €
hose MIFLEX Extreme-hi HP 65 cm
34 €
hose MIFLEX Extreme-hi HP 75 cm
35 €
hose MIFLEX Extreme-hi HP 80 cm
36 €
hose MIFLEX Extreme-hi HP 90 cm
38 €
hose MIFLEX Extreme-hi HP 100 cm
39 €
hose MIFLEX Extreme-hi HP 110 cm
41 €
hose MIFLEX Extreme-hi HP 120 cm
43 €
inflator end piece X01
High-quality end piece with continuous regulation of the flow.
40 €
corrugated hose 340 mm
18 €
knee joint with screwed fitting
12 €
corrugated hosse 400 mm
19 €
compression latch Nielsen Sessions
stainless-steel compression latch + strike for gasketed, airtight and watertight applications from Nielsen Sessions (product number H...
12 €
corrugated hosse 600 mm
21 €
inflator end piece Shark
35 €
screw set for buoy pocket
4 €
screw set for weighting system
4,1 €
screw set for compensator
3,6 €
inflator maintainance kit
52 €
weight inner pocket 3 kg
17 €
rubber band for stage S40
3,1 €
rubber band for S80
3,3 €
stainless-steel hose clamp S40 with protection
stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock
7,6 €
stainless-steel hose clamp S80 with protection
stainless-steel hose clamp in hollow polyester cover with rubber protection of the lock
8,2 €
inflator end piece X01K
36 €
bracket for sidemount
6,1 €